2014年6月12日星期四
2014年4月18日星期五
2014年4月1日星期二
BMW ICOM A2 hardware does not work,how to fix?
Are you often encounter such a problem when you use the BMW ICOM A2 B C, It can work, but after a long time, then when you use it again, fiber head does not work, it is hot. Why? How to fix it?
This problem is caused by the TPS3820 chip. The chip was burned, needs to be replaced, you can change the chip, then BMW ICOM hardware can work properly.
This is the photo shown:
Relared product link: http://www.eobd2.net/wholesale/new-bmw-icom-a2-b-c-diagnostic-and-programming-tool-without-software.html
This problem is caused by the TPS3820 chip. The chip was burned, needs to be replaced, you can change the chip, then BMW ICOM hardware can work properly.
This is the photo shown:
New VPC-100 PinCode Calculator Released
Recent,EOBD2 released the world’s first Hand-held vehicle pincode calculator,that is named VPC-100 PinCode Calculator.It designed for Locksmith man. It also has the web mode, which is suitable to DIY users.Below let us learn more about it!
VPC-100 Main Features:
1. The world's first Hand-held vehicle pincode calculator
2. Support almost all cars
3. Life time free update
4. With web mode.
5. With low price
VPC-100 support Car Model:
ACURA, AUDI, CHERY, CHEVROLET, DACIA, FORD, HONDA, HYUNDAI, JAGUAR, KIA, LEXUS, LINCOLN, MARUTI, MAZDA, MERCURY, MITSUBISHI, NISSAN, QIRUI, RENAULT, LAND ROVER, SCION, SEAT, SKODA, SMART, SUZUKI, TOYOTA, VW.
Note:
1. You can buy token card and use VPC-100 function in website and then decide to buy the machine.
2. The token consumption rate in the web mode is two times of that in VPC-100 machine. For example, if calculate PINCODE for Ford need 10 tokens in VPC-100 machine,
then it need 20 tokens in website mode
If you want to learn more about other OBDII Code Reader,please visit our official website:www.eobd2.net.
1. The world's first Hand-held vehicle pincode calculator
2. Support almost all cars
3. Life time free update
4. With web mode.
5. With low price
VPC-100 support Car Model:
ACURA, AUDI, CHERY, CHEVROLET, DACIA, FORD, HONDA, HYUNDAI, JAGUAR, KIA, LEXUS, LINCOLN, MARUTI, MAZDA, MERCURY, MITSUBISHI, NISSAN, QIRUI, RENAULT, LAND ROVER, SCION, SEAT, SKODA, SMART, SUZUKI, TOYOTA, VW.
Note:
1. You can buy token card and use VPC-100 function in website and then decide to buy the machine.
2. The token consumption rate in the web mode is two times of that in VPC-100 machine. For example, if calculate PINCODE for Ford need 10 tokens in VPC-100 machine,
then it need 20 tokens in website mode
If you want to learn more about other OBDII Code Reader,please visit our official website:www.eobd2.net.
2014年3月30日星期日
ST01 and ST04 Cable Use for Digiprog III
Once a customer asked me what ST01 and ST04 cables are? According to the customer question,i answer that ST01 and ST04 cable cannot work alone. They must be used together with Digiprog III Odometer Programmer.
The customer bought a Digiprog 3 mileage programmer from us in January, and everything was fine. But early this week, when he was adjusting mileage for a 2008 Honda and a 2004 Toyota, the main unit showed that the two cables were required to get the mileage correction done.
We have several customers who encounter this situation. As our product introduction put it, for most cars, Digiprog 3 can adjust odometer data via OBD2 port, but for some particular ones, it will require to disassemble the dashboard and get access to the mileage chip. Then you will need a cable to connect the chip and the odometer correction tool, which will be ST01 or ST04 cable. Or you can replace the cable with a 01/04 adapter. But since a few customers have told us that they find it difficult to handle the adapter, we still recommend you to use the Digiprog 3 main unit cables.
After you enter the car model in the odometer programmer, the device will tell you what cable it will need. And by using the cable to grip the chip, and then connecting the cable to Digiprog 3 main unit, you will be able to correct mileage data from it.
The customer bought a Digiprog 3 mileage programmer from us in January, and everything was fine. But early this week, when he was adjusting mileage for a 2008 Honda and a 2004 Toyota, the main unit showed that the two cables were required to get the mileage correction done.
We have several customers who encounter this situation. As our product introduction put it, for most cars, Digiprog 3 can adjust odometer data via OBD2 port, but for some particular ones, it will require to disassemble the dashboard and get access to the mileage chip. Then you will need a cable to connect the chip and the odometer correction tool, which will be ST01 or ST04 cable. Or you can replace the cable with a 01/04 adapter. But since a few customers have told us that they find it difficult to handle the adapter, we still recommend you to use the Digiprog 3 main unit cables.
After you enter the car model in the odometer programmer, the device will tell you what cable it will need. And by using the cable to grip the chip, and then connecting the cable to Digiprog 3 main unit, you will be able to correct mileage data from it.
2014年3月27日星期四
FGTECH Galletto 2 V53 System Installation and Computer Settings
In order to help fix the problem of fgtech galletto 2 V53, in the following parts, I will show you how to step-by-step install fgtech galletto 2 V53 system and set the computer system.
Step 1: Insert CD into CD-ROM
Step 2: press on the POWER key turn on the computer
Step 3: press F2 key enter into the BIOS settings.
Step 4: set the computer date/time to 2013/1/1, save the settings and then restart the computer.
Step 5: press F12 key, the computer enter into setup menu,Start booting from DVD.
Step 6: choose the option a: setup ghost xp3 English on C: drive.
Step 7: the system starts to automatically install as the following shows.
Step 8: after the computer reboots, it will start the driver configuration.
Step 9: the computer reboots.
Step 10: after the system setup succeeds; one dialogue box appears and named "Conver NTFS",the content is "soon restart and convert the system CD into NTFS format?” Click "Yes" to confirm.
Step 11: NTFS conversion is ongoing.
Step 12: change the system language to English (United States) as the following shows.
Step 1: Insert CD into CD-ROM
Step 2: press on the POWER key turn on the computer
Step 3: press F2 key enter into the BIOS settings.
Step 4: set the computer date/time to 2013/1/1, save the settings and then restart the computer.
Step 5: press F12 key, the computer enter into setup menu,Start booting from DVD.
Step 6: choose the option a: setup ghost xp3 English on C: drive.
Step 7: the system starts to automatically install as the following shows.
Step 8: after the computer reboots, it will start the driver configuration.
Step 9: the computer reboots.
Step 10: after the system setup succeeds; one dialogue box appears and named "Conver NTFS",the content is "soon restart and convert the system CD into NTFS format?” Click "Yes" to confirm.
Step 11: NTFS conversion is ongoing.
Step 12: change the system language to English (United States) as the following shows.
订阅：
博文 (Atom)